Please Baidu search Chuzhou Tengxin New Material Co., Ltd. to find us!

Aluminum profiles, PVC plastic steel profiles, wood plastic profiles


Word:[Big][Middle][Small] QR Code 2018-12-28     Viewed:    


product description: TX-312
Extra high viscosity emulsion protective film pressure sensitive adhesive
TX-312 is a special emulsion pressure sensitive adhesive for two-component ultra-high viscosity protective film. Compared with solvent-based pressure sensitive adhesive, this product has the advantages of environmental protection, no pollution, no toxicity and no taste, easy operation, and high solid content.
Physical index: Exterior Milky white with green Visual inspection
Solid content 54%±1%   GB/T 2793-1995
PH value 7.5~8.5   GB/T 14518-93
Rotational viscosity ≦150mpa.s   GB/T 2794-1995
Glue characteristics: TX-312 is a two-component emulsion pressure-sensitive adhesive. The product has the following characteristics:
1. This product is a special high-viscosity environment-friendly emulsion pressure-sensitive adhesive for rough surface protection film. It is recommended that the protected surface include matte aluminum profiles, matte curtain wall glass and other rough profiles, and rough small area plates.
2. The protective film made of this product has moisture and heat resistance, and is suitable for the protected materials with relatively harsh environment (high temperature and high humidity).
3. High peel strength, moderate viscosity increase effect, good adhesion to materials, excellent warpage resistance.
4. The protective film has high peel strength, light unwinding force, and the protective film has no tensile deformation.
5. The protective film has good aging resistance.

Glue operation method: When mixing the glue, TX-310 was mechanically stirred, and the quantitative T-07 additive was slowly added. After the additive was added, it was stirred for 5 minutes to make it evenly dispersed in the glue. The prepared glue is put into the glue tank through an 80 mesh filter, and the undispersed glue block can be filtered out.
Precautions: 1. The safe use period of the configured glue is 7 ~ 8 hours, so the glue needs to be used up within the safe period.
2. The additive T-07 is afraid of moisture, high heat and low temperature, and ultraviolet light, so the storage condition of the additive T-07 should be: dry and ventilated, the temperature is moderate (5 ℃ ~ 30 ℃), and protected from light.
3. Samples need to be tested before the product is used in batches, and then used in batches after passing the test.
Glue storage and transportation: 1. The product is a non-hazardous chemical and is transported as a general liquid to prevent damage to the packaging.
2. The product is stored in a ventilated and dark warehouse with a temperature of 5 ℃ ~ 30 ℃ and a storage period of 6 months.

Go Back